Lifting

Lifting treatments use energy such as radiofrequency and focused ultrasound to address reduced skin firmness and sagging and improve facial contours. Options include InMode, Shurink Universe, and Density High, selected according to skin condition and concerns.

Total Lifting Treatments at Maypure
499,866  cases

0 comments

Share your thoughts about this treatment.

0/100

No comments yet. Be the first to comment.

Expert Column

View all expert columns

Check out treatment information for your skin concerns written by Maypure doctors.

[Doctor's Column] Density vs. InMode | Guide to Choosing the Right Lifting Procedure for Your Skin

Recent Lifting Trends: The Rise of Radiofrequency Firm and youthful-looking skin is a goal everyone desires. To achieve this, various lifting devices have emerged, and among them Dencerty and InMode are representative procedures that utilize radio frequency (RF) energy. It is considered to be. However, since the two devices differ in their operating principles, purposes, and suitable targets, it is important to choose the one that fits your skin condition. Characteristics and Principles of Density Density delivers 6.78MHz high-frequency waves to the skin layers to promote collagen production and manage skin elasticity. This is a procedure. Its most significant feature is that it sequentially delivers monopolar and bipolar methods in a single shot. ▲ Monopolar Radiofrequency: Acts on the deep layers of the skin → Overall facial elasticity management, contouring ▲ Bipolar radio frequency: Acts on the shallow layers of the skin → Fine lines and skin texture care In addition, it measures individual skin resistance values ​​in real time to regulate energy, and reduces pain and enhances safety with a 5-level cooling function. Advantages and Disadvantages of Density ▲ Advantages By simultaneous monopolar and bipolar irradiation Simultaneous care of deep and shallow layers of the skin It is possible, Uniform and safe energy transfer This is possible. Also, Sophisticated cooling system Pain can be reduced by, Improved elasticity and reduced fine lines through natural collagen regeneration You can expect. ▲ Disadvantages The cost is relatively high, and the effects tend to appear gradually rather than immediately. Characteristics and Principles of InMode High Frequency Inmode uses high frequency Expect fat reduction and tightening simultaneously It is a procedure that can be performed. InMode consists of two main modes, each used for a different purpose. ▲MINI FX Mode: Delivers strong energy to the fat layer → Double chin, deep cheek fat, etc. Fat reduction in specific areas + tightening ▲FORMA Mode: Stimulates the dermis layer with multipolar radio frequency → Promotes collagen and elastin production, improves skin texture and fine lines Advantages and Disadvantages of InMode ▲ Advantages Simultaneous management of fat reduction and tightening It is possible, and through collagen regeneration Improvement of overall skin elasticity and texture This is possible. The procedure time is relatively short, and recovery is fast. ▲ Disadvantages If there is little fat, it may be difficult to apply MINI FX, and since there is a possibility of side effects such as burns, it is important to receive the procedure from a skilled medical professional. If you are concerned about overall loss of facial elasticity and fine lines, Density is suitable. ❙ Source: ClipArtKorea Density vs. InMode: Which Treatment Is Right for Me? ▲ Density : Concerns about overall loss of facial elasticity and fine lines And, For those who want to increase skin density through natural and consistent collagen regeneration It is suitable for those. It can also be a good choice for those who are sensitive to pain and prefer a comfortable procedure. ▲ Inmode : Special features like a double chin or deep cheeks When the contour line has collapsed due to fat in the cervical area , along with fat reduction For those who want to create a sharp V-line with a powerful tightening effect It is helpful to them. 👉 An expert's closing line Density and InMode are radiofrequency lifting treatments with different strengths. By comprehensively considering skin condition and expected results... It is important to choose the procedure most suitable for you between Dencerty and InMode after a thorough consultation with experienced medical staff. do. ※ This article provides general information about Dencerty and InMode and does not recommend any specific procedure, guarantee effectiveness, or replace consultation with a professional. Dr. Im Da-jeong, Chief Director of Maypure Clinic Bucheon Branch · Graduated from Kyung Hee University School of Medicine · Master of Medicine, Kyung Hee University School of Medicine · Resident at Samsung Seoul Hospital · Regular member of the Korean Society of Aesthetic Plastic Surgery · Regular member of the Korean Society of Obesity and Body Shape · Restylane Aesthetic thought leader 📌 Maypure Density High Details [Click] 📌 Maypure InMode Detailed Information [Click] ▼Go to Maypure for free real-time consultation▼

Anonymous

[Doctor's Column] Lifting Is Not a Procedure That 'Pulls Up': The Real Principle of Sagging Skin Firming Again

It is easy to think that sagging skin needs to be "pulled up." As a result, many people visit clinics with high expectations regarding the name "lifting." However, non-surgical lifting is not a procedure that physically pulls the skin. Rather, the collagen within the skin... 'Making again' It is close to the process. ▶ What is the real cause of facial sagging? Facial sagging is not simply caused by the skin stretching. The real cause lies in structural changes deep within the skin. ・ As collagen and elastin fibers in the dermis decrease, skin elasticity declines. ・ As the fascial layer called the SMAS (Superficial Myofascial System) loosens, the strength supporting the tissues weakens. ・ As the subcutaneous fat layer moves downward, the contours of the cheeks and jawline change. In other words, not the skin 'surface', but the skin 'inside' Sagging occurs because this collapses. This is also the reason why fundamental improvement is difficult by merely pulling the surface. ▶ What is the principle behind the effectiveness of non-surgical lifting? Non-surgical lifting devices (radiofrequency, ultrasound, etc.) precisely deliver thermal energy to the deep layers of the skin. When this heat causes microscopic thermal damage to collagen fibers, the body heals the damaged areas while New collagen (new collagen) It produces. ・ High frequency (RF) The device delivers heat uniformly from the dermis to the subcutaneous fibrous septum to induce collagen contraction and new collagen synthesis. ・ High-intensity focused ultrasound (HIFU) The equipment focuses on the SMAS layer to a depth of 1.5 to 4.5 mm to form thermal coagulation points and promotes collagen and elastin synthesis through the caveolin-1 (Cav-1) pathway. ・ Microneedle Radiofrequency (MNRF) It induces collagen remodeling by inserting micro-needles into the skin and directly delivering high-frequency energy into the dermis. This process is better than immediately after the procedure. Over 4 to 6 weeks after the procedure It is characterized by a gradual tightening effect as collagen is rearranged. The degree of effectiveness may vary depending on individual skin condition, age, and lifestyle habits. ❙ Image: Produced by Maypure Doctor Column ▶ What lifting procedures are available at our Yeonsinnae branch? Maypure Clinic Yeonsinnae Branch is equipped with energy devices suitable for each layer of the skin. ・ Coolsonic / Shrink (HIFU) By acting on the SMAS layer with ultrasonic energy, you can expect a deep lifting effect. Dr. Sim Dong-gyu limits the use of the 4.5mm cartridge to the mandibular line and anchor zone, while primarily using the 3.0mm cartridge. ・ Density (high frequency) It delivers high-frequency energy to the dermis layer and is used to improve elasticity. ・ Inmode FX (High Frequency) It is a device that can manage facial fat and elasticity simultaneously. ・ Quadsay (microneedle high frequency) It is used not only for pores and scars but also for collagen remodeling, and a simultaneous skin booster injection (Quad Fusion) option is also available. While the energy device is used alone, it is frequently combined with Olidia (PLLA collagen stimulant). The standard protocol involves using the energy device first, followed by Olidia. The specific treatment type and combination will be provided after assessing your skin condition during the consultation. ▶ How to maintain the lifting effect for a long time? Following the lifestyle habits below along with the procedure will help maintain collagen. ・ UV protection Ultraviolet rays are a major cause of activation of collagen-degrading enzymes (MMPs). Please apply sunscreen with an SPF of 30 or higher thoroughly and reapply every 2 to 3 hours. ・ Get enough sleep Growth hormone is secreted during sleep and is involved in collagen synthesis. At least 7 hours of sleep per day is recommended. ・ Consume antioxidant foods Vitamin C is an essential coenzyme for collagen synthesis. Please consume it consistently through fruits and vegetables. ・ No smoking Smoking is known to reduce blood flow to the skin and promote collagen breakdown. Chief Director Sim Dong-gyu of Maypure Clinic Yeonsinnae Branch · Graduated from Korea University College of Medicine · Master of Medicine, Korea University School of Medicine · Full member of the International Society of Aesthetic Plastic Surgery · Regular member of the Korean Society for the Study of Obesity · Regular member of the Korean Society of Aesthetic Plastic Surgery and Laser Medicine · Allegan Juvederm Expert Member Skin concerns vary from person to person. After a consultation, we will guide you to the most suitable treatment based on your records. 📍 Maypure Clinic Yeonsinnae Branch 3rd Floor, Metro Tower, Directly Connected to Yeonsinnae Station (856 Tongil-ro, Eunpyeong-gu, Seoul) ☎ 02-389-9980 Clinic Hours: Weekdays 10:30–20:30 / Saturdays 10:00–17:00 / Closed on Sundays and Public Holidays ※ This post is intended to provide general information about the procedure, and the effects and recovery period may vary depending on individual skin conditions. ※ Please be sure to consult thoroughly with medical staff before the procedure. Swelling, bruising, and redness may temporarily occur after the procedure. References 1. El-Domyati M et al. “Radiofrequency facial rejuvenation: Evidence-based effect.” J Cosmet Dermatol, 2019. (PMC6541915) 2. Oh S et al. “High-Intensity Focused Ultrasound Increases Collagen and Elastin Fiber Synthesis by Modulating Caveolin-1 in Aging Skin.” Int J Mol Sci, 2023. (PMC10527789) 3. Goldberg DJ et al. “Neocollagenesis and Neoelastinogenesis: From the Laboratory to the Clinic.” J Cutan Aesthet Surg, 2016. (PMC5064677) 4.Wang Y et al. “Energy-Based Skin Rejuvenation: A Review of Mechanisms and Thermal Effects.” J Cosmet Dermatol, 2025. (PMC11837243) #Yeonsinnae Dermatology #Yeonsinnae Lifting #Yeonsinnae Firming Treatment #Eunpyeong-gu Lifting #Yeonsinnae Coolsonic ▼Get a free real-time consultation with Maypure right now▼

Anonymous

Lifting 20 reviews

View all reviews (20)

Check out real reviews written by our customers.

[Doctor's Column][Lifting ②] 'InMode (Fx & Formar)' From Facial Contour Sculpting to Dermal Density Enhancement

I feel deep empathy when I see the exhausted skin of everyone living a fierce life, leading a busy daily routine with no time to even look in the mirror. For those who desperately need efficient care that addresses the root cause of skin problems without interfering with their daily lives, today, based on scientific data... "InMode Lifting (InMode Fx & Forma)" I will clearly explain the core principles of. 1. The Architecture of Facial Contouring: The Difference Between Ultrasound and Radiofrequency When considering a lifting procedure, many people ask which is better: ultrasound (such as Shurink) or radio frequency (InMode). The answer is Each person has a different role. It is. Imagine the face as a single architectural structure. Ultrasonic Lifting: So that the building does not collapse The work of erecting a solid 'steel frame' in the deep layer (SMAS). no see. High-frequency lifting (InMode): Apply cement between the pillars Increasing density (Foma) It is a process of 'sculpting smoothly (Fx)' by cutting away unnecessary debris from the exterior wall. Just as both the framework and the exterior walls are important for a sturdy and beautiful building, these two procedures are a perfect match that complements each other's shortcomings. 2. Inmode's Two Core Weapons: Fx and Forma Inmode is not a single device Combining two modes with different purposes to produce a high-quality result It produces. division Inmode Fx (MiniFx) Inmode Forma Key role Reduction of unnecessary fat and contour sculpting Increased skin density and improved elasticity Target area Areas of fat accumulation such as the double chin and deep cheeks Thin and sagging skin on the sides of the cheeks, front of the cheekbones, etc. scientific mechanism through high-voltage electric shock (HVP) fat cell death through continuous high-frequency heat Collagen remodeling Expected effects Reduces dull lower facial weight and restores a sharp jawline Achieve firm skin texture without worrying about sunken cheeks 3. Why should you use FX and Poma together? 🧩 Why should you do Fx + Forma together? This is the key point I feel in clinical practice. If you only improve elasticity, your face won't look smaller, and The point is that if you only reduce fat, your skin may sag. so, ✔ Fx → Structure 정리 ✔ Forma → Skin quality improvement The two steps must interlock for it to be natural. ​ 📌 Recommended for these people ✔ People in their 30s and 40s whose jawline has started to fade ✔ If you are concerned about a double chin or chubby cheeks ✔ Feeling like skin elasticity has decreased ✔ When you want to look naturally younger ❗ Realistic expectations (important) ❌ Surgical-grade lifting → Not ❌ One-time procedure → Not ​ ✔ Instead 👉 Cumulative effect upon repetition 👉 Most efficient in early aging Natural facial contours can only be restored when Fx, which refines unnecessary structures, and Foma, which improves skin quality, work in tandem. However, you cannot achieve magical, surgery-level results with a single procedure; the most realistic and efficient approach is to gradually and effectively address early signs of aging through repeated treatments. 🩺 [Expert's Wrap-up Line] Skin problems cannot be solved simply by tightening the surface. Fundamental changes within the tissue produce results. Sunae Maypure Clinic insists on a 'Custom Vector Design' that involves a three-dimensional diagnosis of the patient's skin thickness, fat distribution, and the direction of fascial sagging to delicately distinguish between areas where fat needs to be removed and areas where elasticity needs to be restored. Through scientifically proven procedures and honest personalized diagnoses, rather than superficial packaging I hope you experience the real 'Beauty Inside Out' that fills you up firmly from the inside out. [Mandatory Notice for Compliance with Medical Act] ※ All dermatological procedures may result in side effects, ranging from minor to major, such as erythema, swelling, burns, inflammation, and cheek hollowing, depending on an individual's skin condition and characteristics. This post is written for the purpose of providing medical information and does not guarantee 100% of the results of specific procedures. Please ensure you have a thorough in-person consultation with experienced medical professionals before the procedure. Director Kim Tae-hee of Maypure Clinic Sunae Branch · Graduated from Chonnam National University School of Medicine · Internal Medicine Specialist at Chonnam National University Hospital · (Former) Clinical Professor, Department of Pulmonology, Gangnam Severance Hospital · (Former) Assistant Professor, Department of Pulmonology, Kangnam Sacred Heart Hospital · Regular member of the Korean Society of Internal Medicine · Regular member of the Korean Society of Tuberculosis and Respiratory Diseases · Member of the Korean Society of Cosmetology 👉 [Maypure Treatment Information: [High-frequency lifting 'InMode'] https://www.maypureclinic.com/community/treatment-guide/98321307 ] 👉 [Go to Maypure for free real-time consultation] https://pf.kakao.com/_ljPqE 👉 If you are interested in the deeper medical principles of this procedure or a review of international research papers, please refer to the post on the 'Beauty InsideOut' blog. [Visit the blog "Beauty InsideOut: The Story of Visible Skin"] https://blog.naver.com/dr_insideout

Anonymous

[Doctor's Column] Density vs. InMode | Guide to Choosing the Right Lifting Procedure for Your Skin

Recent Lifting Trends: The Rise of Radiofrequency Firm and youthful-looking skin is a goal everyone desires. To achieve this, various lifting devices have emerged, and among them Dencerty and InMode are representative procedures that utilize radio frequency (RF) energy. It is considered to be. However, since the two devices differ in their operating principles, purposes, and suitable targets, it is important to choose the one that fits your skin condition. Characteristics and Principles of Density Density delivers 6.78MHz high-frequency waves to the skin layers to promote collagen production and manage skin elasticity. This is a procedure. Its most significant feature is that it sequentially delivers monopolar and bipolar methods in a single shot. ▲ Monopolar Radiofrequency: Acts on the deep layers of the skin → Overall facial elasticity management, contouring ▲ Bipolar radio frequency: Acts on the shallow layers of the skin → Fine lines and skin texture care In addition, it measures individual skin resistance values ​​in real time to regulate energy, and reduces pain and enhances safety with a 5-level cooling function. Advantages and Disadvantages of Density ▲ Advantages By simultaneous monopolar and bipolar irradiation Simultaneous care of deep and shallow layers of the skin It is possible, Uniform and safe energy transfer This is possible. Also, Sophisticated cooling system Pain can be reduced by, Improved elasticity and reduced fine lines through natural collagen regeneration You can expect. ▲ Disadvantages The cost is relatively high, and the effects tend to appear gradually rather than immediately. Characteristics and Principles of InMode High Frequency Inmode uses high frequency Expect fat reduction and tightening simultaneously It is a procedure that can be performed. InMode consists of two main modes, each used for a different purpose. ▲MINI FX Mode: Delivers strong energy to the fat layer → Double chin, deep cheek fat, etc. Fat reduction in specific areas + tightening ▲FORMA Mode: Stimulates the dermis layer with multipolar radio frequency → Promotes collagen and elastin production, improves skin texture and fine lines Advantages and Disadvantages of InMode ▲ Advantages Simultaneous management of fat reduction and tightening It is possible, and through collagen regeneration Improvement of overall skin elasticity and texture This is possible. The procedure time is relatively short, and recovery is fast. ▲ Disadvantages If there is little fat, it may be difficult to apply MINI FX, and since there is a possibility of side effects such as burns, it is important to receive the procedure from a skilled medical professional. If you are concerned about overall loss of facial elasticity and fine lines, Density is suitable. ❙ Source: ClipArtKorea Density vs. InMode: Which Treatment Is Right for Me? ▲ Density : Concerns about overall loss of facial elasticity and fine lines And, For those who want to increase skin density through natural and consistent collagen regeneration It is suitable for those. It can also be a good choice for those who are sensitive to pain and prefer a comfortable procedure. ▲ Inmode : Special features like a double chin or deep cheeks When the contour line has collapsed due to fat in the cervical area , along with fat reduction For those who want to create a sharp V-line with a powerful tightening effect It is helpful to them. 👉 An expert's closing line Density and InMode are radiofrequency lifting treatments with different strengths. By comprehensively considering skin condition and expected results... It is important to choose the procedure most suitable for you between Dencerty and InMode after a thorough consultation with experienced medical staff. do. ※ This article provides general information about Dencerty and InMode and does not recommend any specific procedure, guarantee effectiveness, or replace consultation with a professional. Dr. Im Da-jeong, Chief Director of Maypure Clinic Bucheon Branch · Graduated from Kyung Hee University School of Medicine · Master of Medicine, Kyung Hee University School of Medicine · Resident at Samsung Seoul Hospital · Regular member of the Korean Society of Aesthetic Plastic Surgery · Regular member of the Korean Society of Obesity and Body Shape · Restylane Aesthetic thought leader 📌 Maypure Density High Details [Click] 📌 Maypure InMode Detailed Information [Click] ▼Go to Maypure for free real-time consultation▼

Anonymous

[Doctor's Column] Lifting Is Not a Procedure That 'Pulls Up': The Real Principle of Sagging Skin Firming Again

It is easy to think that sagging skin needs to be "pulled up." As a result, many people visit clinics with high expectations regarding the name "lifting." However, non-surgical lifting is not a procedure that physically pulls the skin. Rather, the collagen within the skin... 'Making again' It is close to the process. ▶ What is the real cause of facial sagging? Facial sagging is not simply caused by the skin stretching. The real cause lies in structural changes deep within the skin. ・ As collagen and elastin fibers in the dermis decrease, skin elasticity declines. ・ As the fascial layer called the SMAS (Superficial Myofascial System) loosens, the strength supporting the tissues weakens. ・ As the subcutaneous fat layer moves downward, the contours of the cheeks and jawline change. In other words, not the skin 'surface', but the skin 'inside' Sagging occurs because this collapses. This is also the reason why fundamental improvement is difficult by merely pulling the surface. ▶ What is the principle behind the effectiveness of non-surgical lifting? Non-surgical lifting devices (radiofrequency, ultrasound, etc.) precisely deliver thermal energy to the deep layers of the skin. When this heat causes microscopic thermal damage to collagen fibers, the body heals the damaged areas while New collagen (new collagen) It produces. ・ High frequency (RF) The device delivers heat uniformly from the dermis to the subcutaneous fibrous septum to induce collagen contraction and new collagen synthesis. ・ High-intensity focused ultrasound (HIFU) The equipment focuses on the SMAS layer to a depth of 1.5 to 4.5 mm to form thermal coagulation points and promotes collagen and elastin synthesis through the caveolin-1 (Cav-1) pathway. ・ Microneedle Radiofrequency (MNRF) It induces collagen remodeling by inserting micro-needles into the skin and directly delivering high-frequency energy into the dermis. This process is better than immediately after the procedure. Over 4 to 6 weeks after the procedure It is characterized by a gradual tightening effect as collagen is rearranged. The degree of effectiveness may vary depending on individual skin condition, age, and lifestyle habits. ❙ Image: Produced by Maypure Doctor Column ▶ What lifting procedures are available at our Yeonsinnae branch? Maypure Clinic Yeonsinnae Branch is equipped with energy devices suitable for each layer of the skin. ・ Coolsonic / Shrink (HIFU) By acting on the SMAS layer with ultrasonic energy, you can expect a deep lifting effect. Dr. Sim Dong-gyu limits the use of the 4.5mm cartridge to the mandibular line and anchor zone, while primarily using the 3.0mm cartridge. ・ Density (high frequency) It delivers high-frequency energy to the dermis layer and is used to improve elasticity. ・ Inmode FX (High Frequency) It is a device that can manage facial fat and elasticity simultaneously. ・ Quadsay (microneedle high frequency) It is used not only for pores and scars but also for collagen remodeling, and a simultaneous skin booster injection (Quad Fusion) option is also available. While the energy device is used alone, it is frequently combined with Olidia (PLLA collagen stimulant). The standard protocol involves using the energy device first, followed by Olidia. The specific treatment type and combination will be provided after assessing your skin condition during the consultation. ▶ How to maintain the lifting effect for a long time? Following the lifestyle habits below along with the procedure will help maintain collagen. ・ UV protection Ultraviolet rays are a major cause of activation of collagen-degrading enzymes (MMPs). Please apply sunscreen with an SPF of 30 or higher thoroughly and reapply every 2 to 3 hours. ・ Get enough sleep Growth hormone is secreted during sleep and is involved in collagen synthesis. At least 7 hours of sleep per day is recommended. ・ Consume antioxidant foods Vitamin C is an essential coenzyme for collagen synthesis. Please consume it consistently through fruits and vegetables. ・ No smoking Smoking is known to reduce blood flow to the skin and promote collagen breakdown. Chief Director Sim Dong-gyu of Maypure Clinic Yeonsinnae Branch · Graduated from Korea University College of Medicine · Master of Medicine, Korea University School of Medicine · Full member of the International Society of Aesthetic Plastic Surgery · Regular member of the Korean Society for the Study of Obesity · Regular member of the Korean Society of Aesthetic Plastic Surgery and Laser Medicine · Allegan Juvederm Expert Member Skin concerns vary from person to person. After a consultation, we will guide you to the most suitable treatment based on your records. 📍 Maypure Clinic Yeonsinnae Branch 3rd Floor, Metro Tower, Directly Connected to Yeonsinnae Station (856 Tongil-ro, Eunpyeong-gu, Seoul) ☎ 02-389-9980 Clinic Hours: Weekdays 10:30–20:30 / Saturdays 10:00–17:00 / Closed on Sundays and Public Holidays ※ This post is intended to provide general information about the procedure, and the effects and recovery period may vary depending on individual skin conditions. ※ Please be sure to consult thoroughly with medical staff before the procedure. Swelling, bruising, and redness may temporarily occur after the procedure. References 1. El-Domyati M et al. “Radiofrequency facial rejuvenation: Evidence-based effect.” J Cosmet Dermatol, 2019. (PMC6541915) 2. Oh S et al. “High-Intensity Focused Ultrasound Increases Collagen and Elastin Fiber Synthesis by Modulating Caveolin-1 in Aging Skin.” Int J Mol Sci, 2023. (PMC10527789) 3. Goldberg DJ et al. “Neocollagenesis and Neoelastinogenesis: From the Laboratory to the Clinic.” J Cutan Aesthet Surg, 2016. (PMC5064677) 4.Wang Y et al. “Energy-Based Skin Rejuvenation: A Review of Mechanisms and Thermal Effects.” J Cosmet Dermatol, 2025. (PMC11837243) #Yeonsinnae Dermatology #Yeonsinnae Lifting #Yeonsinnae Firming Treatment #Eunpyeong-gu Lifting #Yeonsinnae Coolsonic ▼Get a free real-time consultation with Maypure right now▼

Anonymous
Write a Review